Land measuring guide
How to measure acreage with your phone
You can measure acreage with a phone in a few minutes: tap the corners of the land on a satellite map, or walk the boundary while GPS records your path, then read the area in acres. Both give an estimate, and a third method, pacing it out, works with no app at all.
By Eutopix Labs P.S.A. · · AreaWalk is on the App Store
Method 1: tap the corners on a satellite map
This is the fastest way and works from your couch. Open a satellite map, zoom until you can see the edges of the land (fence lines, tree lines, field edges, a driveway), and place a point on each corner in order. The app joins the points into a polygon and calculates its area.
- Search for the address or place and zoom in until the boundary is clearly visible.
- Tap each corner once, going around the edge in one direction.
- Drag any point that landed in the wrong spot. Corners placed on visible features such as fence posts, hedges or field edges are easier to place exactly than corners placed in open grass.
- Read the area and perimeter. Check the side lengths too: if one side reads 900 ft and you know it is closer to 600 ft, a corner is misplaced.
The weak point is the imagery, not the arithmetic. Satellite pictures can be offset from the true ground position by a few metres, and tree cover or shadows can hide the real edge.
Method 2: walk the boundary with GPS
Walking the edge records where you actually were, which helps when the imagery is old, covered by trees or does not show the boundary (a mown line, a stake line). Walk slowly along the boundary holding the phone steady, and let the GPS accuracy figure settle before you start. Phone GPS is typically good to a few metres in the open and worse beside buildings and under tree canopy, so the result is an estimate (see how accurate GPS is for measuring land).
- Wait for a good fix before the first step, not after.
- Stay on the line you want measured; cut corners only where you would cut them on the map.
- Pause at gates and obstacles, then resume on the line.
- For a very small plot, GPS error is a large share of the size, so tapping on a zoomed-in map is usually better.
Method 3: pace it and calculate
If you know your stride length, count your steps along each side and multiply. For a roughly rectangular plot, multiply length by width in feet and divide by 43,560 to get acres. For anything irregular, split the plot into rectangles and triangles, work out each in square feet, add them up and divide by 43,560.
| Shape | Sides | Area (ft²) |
|---|---|---|
| Rectangle | 120 ft × 80 ft | 9,600 |
| Triangle | base 120 ft, height 50 ft (half of 120 × 50) | 3,000 |
| Total | 12,600 ÷ 43,560 | 0.29 acres |
This is slow but it shows you what the number should look like, which makes it a good sanity check for either app method. Conversions between units are in our acres to hectares and square feet guide.
Which method should you use?
| Situation | Better choice |
|---|---|
| Clear fence lines or field edges on the imagery | Tap corners on the satellite map |
| Boundary hidden by trees or not visible from above | Walk it with GPS, or pace it |
| Very small area (a garden bed, a roof) | Tap on a zoomed-in map, or use a tape |
| A legal question (sale, dispute, permit) | A licensed surveyor and official records |
Measuring with AreaWalk
AreaWalk is one option for this on iPhone. Choose the Area tool, tap each corner on the satellite map, and drag a corner or pull a new one out of a side tag to adjust. The area and perimeter update as you go, every side length is shown on the tape, and you can switch the result between acres, hectares, m², ft², sq yd, km² and sq mi. Walk mode traces the boundary on foot with live GPS accuracy, pause and resume. Measuring and reading results is free with three saved measurements; walk mode, unlimited saves and exports (PDF report, KML, GeoJSON, CSV) are part of AreaWalk Pro. Calculations are geodesic on the WGS84 ellipsoid, and results are estimates, not a legal survey. See what AreaWalk does. Get it on the App Store.
Frequently asked questions
Can I measure acreage with my phone for free?
Yes. Many map and measuring apps let you tap points on a map and read the area at no cost, and you can also pace the boundary and calculate by hand. AreaWalk lets you measure and read results for free and save three measurements; walk mode and exports are in Pro.
How do I measure an irregular piece of land?
Tap a point at every corner where the boundary changes direction, so the shape follows the real edge. Or split the plot into rectangles and triangles, calculate each in square feet, add them and divide by 43,560.
Is a phone measurement good enough to sell or buy land?
No. A phone gives an estimate that depends on GPS and map imagery. For sales, boundaries, permits or disputes, use a licensed surveyor and official records.
Should I walk the boundary or tap the map?
Tap the map when the edges are visible on the imagery; walk it when they are hidden or the imagery is outdated. For very small plots, tapping a zoomed-in map is usually more precise than GPS.
More guides
Estimates only. AreaWalk is a measuring aid, not a legal survey. Questions? support@areawalk.app.